Advance Surge Suppressor logo





Voltage Signal Surge Suppressor One Wire


One Wire
Voltage Signal Surge Protector

Type: TSP-WG4-xxV-1A-0y

Where:

xx = Rated Compliance Voltage
y = 1 - Polarized Voltage
y = 3 - Non Polarized Voltage

Features:

Application: Transient surge protectors provide common and differential mode protection for toll booths, drawbridges, street light controllers and railroad crossing gates/signals. Electronic equipment is extremely susceptible to transient voltages and surge currents due to its relatively fragile semiconductor construction. A surge protector is a cost effective method of ensuring that equipment will have maximum life.

Voltage Signal Surge Suppressor One Wire connection diagram

Function: The module has a PROTECTED side which is connected to the data acquisition system input and a LINE side which is connected to the transmission wire. The EARTH connection of the modules must be terminated to earth by low impedance heavy gauge wire.

Description:

The TSP-WG4-xxV-1A-0y is a three stage transient protection module that provides over-voltage and surge current protection for 1 wire voltage signal circuits. Internally, the module has 100% redundancy to safeguard the system and prevent nuisance failures. This series of modules is for systems using signal and return wires.

Technical Specifications: All specifications typical at nominal input voltage and 25 degrees C unless otherwise specified.

Operating Voltage: (See note)

+(+/-)10 V

+(+/-)24 V

+(+/-)60 V

+(+/-)130 V

LINE Side Max. Input Voltage

Over-Voltage Level PROTECTED Side Suppression Begins:
Stage Two TRANZORB
State Three MOV

Maximum Clamp Volts for Maximum Transients on Line:
Stage Two TRANZORB
Stage Three MOV 		11.1VDC


12.4VDC
16.5VRMS

18.2VDC
36VRMS 		28.2VDC


31.4VDC
35VRMS

45.7VDC
77VRMS 		70VDC


77.9VDC
85VRMS

113VDC
165VRMS 		145VDC


162VDC
165VRMS

234VDC
300VRMS
Surge Current:
8/20µSec Pulse
2mSec Pulse
2000 A
10 Joules
4000 A
44 Joules
13000 A
66 Joules
13000 A
120 Joules
Series Resistance 15 Ohms 15 Ohms 15 Ohms 15 Ohms
Resistance To Earth:
Max Over-Voltage
Operating Voltage
0.01 Ohm
>1 MOhm
0.01 Ohm
>1 MOhm
0.01 Ohm
>1 MOhm
0.01 Ohm
>1 MOhm
Suppression Threshold Voltage Derating: (mV/°C) 11 30 86 188

(NOTE: Polarized = +VDC Non-Polarized = +/-VDC or AC RMS)

Packaging and Dimensions:
WEG 4 terminal modular housing, #12 to #22 AWG terminals.
Size: 60.6 mm x 90.5 mm x 16.5 mm (2.39" x 3.56" x 0.65") (W x H x D excluding DIN Rail)
Operating Conditions:
-40 to +85°C (-40 to 185°F), 0 to 93% Relative Humidity
Ordering Part Number:
+10V ..... TSP-WG4-10V-1A-01
+ 24V ......TSP-WG4-24V-1A-01
+ 60V .... TSP-WG4-60V-1A-01
+ 130V ....TSP-WG4-130V-1A-01
+/-10V ....TSP-WG4-10V-1A-03
+/- 24V ....TSP-WG4-24V-1A-03
+/- 60V ....TSP-WG4-60V-1A-03
+/- 130V ..TSP-WG4-130V-1A-03
Variations available by special order.

Specifications are subject to change without notice.

To place an order or to get more information, please call us:

Phone:
Fax:
General Inquiries:
Sales:

 (905)602-9270
(905)602-9279
info@advancesurgesuppressor.com
sales@advancesurgesuppressor.com

We accept: VISAMasterCard


Return to Surge Suppressor Main Page