AC Surge Protector

Type: TSP-WG6-xxxVAC-10A-01

Where:

xxx=Input Voltage

Features:

Handles large current surges and voltage spikes without wear and tear to the circuitry of the protector
Protection against closer (stronger) lightning strikes
Hybrid design features reflection of surge energy as well as MOV suppression
LED indicator ensures continued protection and avoids unnecessary replacement costs
100% redundancy
Compact WEG 6 pin DIN rail mount

Application: Transient surge protectors provide common and differential mode protection for toll booths, drawbridges, street light controllers and railroad crossing gates/signals. Electronic equipment is extremely susceptible to transient voltages and surge currents due to its relatively fragile semiconductor construction. A surge protector is a cost effective method of ensuring that equipment will have maximum life.

Function: The module has a PROTECTED SIDE - LIVE, NEUTRAL and EARTH which is connected to the equipment supply lines requiring protection. It also has a LINE SIDE - LIVE, NEUTRAL and EARTH which is connected to the AC supply power conductors. The EARTH connection of the modules must be terminated to earth by low impedance heavy gauge wire.

AC Surge Suppressors connection diagram

Description:
The TSP-WG6-xxxVAC-10A-01 is a three stage transient protection module which provides over-voltage and surge current protection for single phase supply lines. The first stage provides transient rise time reduction. The second stage provides the primary transient voltage clamping and a LED circuit to indicate that the device is still fully functional. This second stage will be removed from the circuit well before the useful life of the device has expired. This will provide ample time for the device to be replaced ensuring continued protection of the connected equipment. The third stage is the most rugged and provides the bulk of the transient protection.

Technical Specifications: All voltages are RMS unless otherwise specified. All specifications typical at nominal input voltage and 25°C unless otherwise specified.

Operating Voltage	18VAC	24VAC	48VAC	120VAC	240VAC
LINE Side Max. Input Voltage: PROTECTED Side Voltage Level Suppression Begins: Stage Two Stage Three Max. Clamp Volts for Max. Transients on Line: Stage Two Stage Three Surge Current: 8/20µ Sec Pulse L to N L to E N to E 2m Sec Pulse L to N L to E N to E Response Time Resistance to Earth Max. Over-Voltage: Operating Voltage:	20VAC 30V 35V 65V 77V 9000A 4000A 4000A 94J 44J 44J <5 nSec 0.01 Ohm >1 MOhm	30VAC 42V 50V 93V 110V 9000A 4000A 4000A 139J 66J 66J <5 nSec 0.01 Ohm >1 MOhm	60VAC 90V 110V 165V 200V 30500A 13000A 13000A 177J 80J 80J <5 nSec 0.01 Ohm >1 MOhm	130VAC 175V 195V 340V 360V 36500A 16000A 16000A 346J 156J 156J <5 nSec 0.01 Ohm >1 MOhm	270VAC 390V 440V 710V 775V 28500A 16000A 8000A 590J 346J 173J <5nSec 0.01 Ohm >1 MOhm

Packaging & Dimensions:: WEG 6 terminal modular housing, #12 to #22 AWG terminals.; Size: 60.6 mm x 90.5 mm x 22.5 mm (2.39" x 3.56" x 0.89") (W x H x D excluding DIN Rail)

Operating Conditions:: -40 to +85°C (-40 to 185°F), 0 to 93% Relative Humidity

Ordering Part Number: With Indicator: 18VAC 10A ... TSP-WG6-18VAC-10A-01; 24VAC 10A ... TSP-WG6-24VAC-10A-01; 48VAC 10A ... TSP-WG6-48VAC-10A-01; 120VAC 10A ...TSP-WG6-120VAC-10A-01; 240VAC 10A ...TSP-WG6-240VAC-10A-01

Variations available by special order.

Specifications are subject to change without notice.

To place an order or to get more information, please call us:

Phone:
Fax:
General Inquiries:
Sales:

(905)602-9270
(905)602-9279
info@advancesurgesuppressor.com
sales@advancesurgesuppressor.com

We accept:

Return to Surge Suppressor Main Page