DC Surge Protector

Type: TSP-WG6-xxxVDC-10A-01

Where:

xxx = Input Voltage

Features:

Handles large current surges and voltages spikes without wear and tear to the circuitry of the protector
Protection against closer (stronger) lightning strikes
Hybrid design features reflection of surge energy as well as MOV suppression
LED indicator ensures continued protection and avoids unnecessary replacement costs
100% redundancy
Compact WEG 6 pin DIN rail mount

Application: Transient surge protectors provide common and differential mode protection for toll booths, drawbridges, street light controllers and railroad crossing gates/signals. Electronic equipment is extremely susceptible to transient voltages and surge currents due to its relatively fragile semiconductor construction. A surge protector is a cost effective method of ensuring that equipment will have maximum life.

Function: The module has a PROTECTED SIDE - POSITIVE, COMMON and EARTH which is connected to the equipment supply lines requiring protection. It also has a LINE SIDE- POSITIVE, COMMON and EARTH which is connected to the DC supply power conductors. The EARTH connection of the modules must be terminated to earth by low impedance heavy gauge wire.

DC Surge Suppressor connection diagram

Description:
The TSP-WG6-xxxVDC-10A-01 is a three stage transient protection module which provides over-voltage and surge current protection for 2 wire DC supply lines. The first stage provides transient rise time reduction. The second stage provides the primary transient voltage clamping and a LED circuit to indicate that the device is still fully functional. Under normal operating circumstances, the LED will be automatically extinguished before the useful life of the device has expired. This will provide ample time for the device to be replaced ensuring continued protection of the connected equipment. The third stage is the most rugged and provides the bulk of the protection.

Technical Specifications: All voltages are RMS unless otherwise specified. All specifications typical at nominal input voltage and 25°C unless otherwise specified.

Operating Voltage	5VDC	7VDC	13.8VDC	24VDC	32VDC	48VDC	110VDC	125VDC
LINE Side Max. Input Voltage PROTECTED Side Voltage Level Suppression Begins: Stage Two Stage Three Max. Clamp Volts for Max. Transients on Line: Stage Two Stage Three Surge Current: 8/2µSec Pulse + TO - + TO E - TO E 2mSec Pulse + TO - + TO E - TO E Response Time Resistance to Earth: Max Over-Voltage Operating Voltage	5.5V 6.4V 8.8V 17V 27V 5000A 2000A 2000A 12.7J 5.6J 5.6J <5 nSec 0.01 Ohm >1 MOhm	8V 13.8V 14.3V 27V 35V 5000A 2000A 2000A 18.8J 8J 8J <5 nSec 0.01 Ohm >1 MOhm	18V 20V 25V 43V 53V 9000A 4000A 4000A 60J 28J 28J <5 nSec 0.01 Ohm >1 MOhm	26V 30V 35V 65V 77V 9000A 4000A 4000A 94J 44J 44J <5 nSec 0.01 Ohm >1 MOhm	38V 41.5V 50V 93 110V 9000A 4000A 4000A 141J 66J 66J <5 nSec 0.01 Ohm >1 MOhm	56V 61V 73V 135V 135V 27000A 13000A 13000A 131J 54J 54J <5 nSec 0.01 Ohm >1 MOhm	125V 140V 160V 250V 300V 27000A 13000A 13000A 265J 120J 120J <5 nSec 0.01 Ohm >1 MOhm	150V 160V 185V 300V 340V 36500A 16000A 16000A 326J 148J 148J <5 nSec 0.01 Ohm >1 MOhm

Dimensions & Packaging:: WEG 6 terminal modular housing, #12 to #22 AWG terminals.; Size: 60.6 mm x 90.5 mm x 22.5 mm (2.39" x 3.56" x 0.89") (W x H x D excluding DIN Rail)

Operating Conditions:: -40 to +85 °C (-40 to 185°F), 0 to 93% Relative Humidity

Ordering Part Number:: 5V .............TSP-WG6-5VDC-10A-01; 7V .............TSP-WG6-7VDC-10A-01; 13.8V ........TSP-WG6-13.8VDC-10A-01; 24V ...........TSP-WG6-24VDC-10A-01; 32V ...........TSP-WG6-32VDC-10A-01; 48V ...........TSP-WG6-48VDC-10A-01; 110V .........TSP-WG6-110VDC-10A-01; 125V .........TSP-WG6-125VDC -10A-01

Variations available by special order.

Specifications are subject to change without notice.

To place an order or to get more information, please call us:

Phone:
Fax:
General Inquiries:
Sales:

(905)602-9270
(905)602-9279
info@advancesurgesuppressor.com
sales@advancesurgesuppressor.com

We accept:

Return to Surge Suppressor Main Page