Advance Surge Suppressor logo





Current Surge Suppressor Two Wire

Two Wire 4 to 20 mA
Current Loop Surge Protector


Type: TSP-WG6-20MA-xxxV-02 (Unipolar)
Type: TSP-WG6-20MA-xxxV-04 (Bipolar)


Where: xxx = Compliance Voltage

Features:

Application: Transient surge protectors provide common and differential mode protection for toll booths, drawbridges, street light controllers and railroad crossing gates/signals. Electronic equipment is extremely susceptible to transient voltages and surge currents due to its relatively fragile semiconductor construction. A surge protector is a cost effective method of ensuring that equipment will have maximum life.

Function: The module has a PROTECTED SIGNAL and POWER side which is connected to the data acquisition system input and power supply. It also has a LINE SIGNAL and POWER side which is connected to the transmission wire. The EARTH connection of the modules must be terminated to earth by low impedance heavy gauge wire.

Current Surge Suppressor Two Wire connection diagram

Description: The transient surge protector features a protection mechanism which provides over-voltage and surge current protection for 2 wire +/- 4-20mA current loops. The module provides two stages of protection for the power path and three stages of protection for the signal path. Internally, the module has 100% redundancy to safeguard the system and prevent nuisance failures. This series of modules is for systems using a power supply at the data acquisition system end of the twisted pair, to power the transducer.

Technical Specifications: All specifications typical at nominal input voltage and 25°C unless otherwise specified.

Operating Voltage:
(See Note)		 +(+/-)15V +(+/-)30V +(+/-)60V +(+/-)200V
Signal Power Signal Power Signal Power Signal Power
LINE Side Max. Input Voltage 17.1VDC 17.1VDC 33.3VDC 33.3VDC 70.1VDC 70.1VDC 256VDC 256VDC
Over-Voltage Level PROTECTED Side Suppression Begins 19VDC TRANZORB 20VRMS MOV 20VRMS
MOV		 37.1VDC TRANZORB 42VRMS
MOV		 42VRMS
MOV		 77.9VDC TRANZORB 89VRMS
MOV		 89VRMS
MOV		 285VDC TRANZORB 330VRMS
MOV		 330VRMS
MOV
Maximum Clamp Volts for Max. Transients on Line 27.7VDC TRANZORB 43VRMS
MOV		 43VRMS
MOV		 53.9VDC TRANZORB 93VRMS
MOV		 93VRMS
MOV		 113VDC TRANZORB 165VRMS
MOV		 165VRMS
MOV		 414VDC TRANZORB 595VRMS
MOV		 595VRMS
MOV
Surge Current:
8/20µSec Pulse
2mSec Pulse		 4000A
24 Joules		 4000A
24 Joules		 4000A
52 Joules		 4000A
52 Joules		 13000A
66 Joules		 13000A
66 Joules		 8000A
130 Joules		 8000A
130 Joules
Series Resistance 15 Ohms 5 Ohms 15 Ohms 5 Ohms 15 Ohms 5 Ohms 15 Ohms 5 Ohms
Resistance to Earth:
Max. Over-Voltage
Operating Voltage		 0.01 Ohm
>1 MOhm		 0.01 Ohm
>1 MOhm		 0.01 Ohm
>1 MOhm		 0.01 Ohm
>1 MOhm		 0.01 Ohm
>1 MOhm		 0.01 Ohm
>1 MOhm		 0.01 Ohm
>1 MOhm		 0.01 Ohm
>1 MOhm
Suppression Threshold Voltage Derating (mV/°C) 19.0 19.0 36.0 36.0 86.0 86.0 315.0 315.0

(NOTE: Unipolar = +VDC; Bipolar = +/-VDC or AC RMS)

Packaging and Dimensions:
WEG 6 terminal modular housing, #12 to #22 AWG terminals.
Size: 60.6 mm x 90.5 mm x 22.5 mm (2.39" x 3.56" x 0.89") (W x H x D excluding DIN Rail)
Operating Conditions:
-40 to +85 °C (-40 to 185°F), 0 to 93% Relative Humidity
Ordering Part Number:
+15V ..... TSP-WG6-20MA-15V-02 (Unipolar)
+30V ..... TSP-WG6-20MA-30V-02
+60V ..... TSP-WG6-20MA-60V-02
+200V .... TSP-WG6-20MA-200V-02
± 15V ..... TSP-WG6-20MA-15V-04 (Bipolar)
± 30V ..... TSP-WG6-20MA-30V-04
± 60V ..... TSP-WG6-20MA-60V-04
± 200V ... TSP-WG6-20MA-200V-04
Variations are available by special order.

Specifications are subject to change without notice.

To place an order or to get more information, please call us:

Phone:
Fax:
General Inquiries:
Sales:

 (905)602-9270
(905)602-9279
info@advancesurgesuppressor.com
sales@advancesurgesuppressor.com

We accept: VISAMasterCard


Return to Surge Suppressor Main Page